Hello,
I don't know, but I got only 1 DVD and it has Alex as the default
voice. Seriously, I'm not making this up.
I did a complete reinstall and erase. Alex is the voice that was
present on my system after Booting from the Install DVD.
Really really really. It is Alex and I'm sure about that.
Dan
On Oct 26, 2007, at 10:12 PM, Dean Hudson wrote:
During the installation, Fred is most definitely the voice. The
Alex voice will not fit on the installation DVD. Trust me on this
one. Alex comes up after the installation.
On Oct 26, 2007, at 10:07 PM, Dan Keys wrote:
Hello,
When I installed, Fred was not the default voice, Alex was.
Dan
On Oct 26, 2007, at 10:04 PM, Dean Hudson wrote:
There could be another issue going on. The volume for the speech
could be too low. You can bring up the speech roter (VOKeys-
command) then navigate to the volume option, which is two presses
on the right arrow key when holding down the control-option-
command, then pressing up arrow with those modifier keys pressed.
It will say 100-percent, but just keep pressing up arrow, and the
volume will increase. Note, the speech during the installation is
Fred, not Alex. Alex comes in to effect once you star the setup
assistant.
If you still don't hear speech during the installer, then there is
a bug.
On Oct 26, 2007, at 9:12 PM, Cheryl Homiak wrote:
Sorry if saying this is too obvious, but when you put in the
installer cd and it revs up, you do have to use cmd-f5 to turn on
voiceover.
--
Cheryl
"Where your treasure is,
there will your heart be also."
