Hi Helmut,
dnsmasq finds the right interface with the static address automaticly.
If you write interface=.. you discard the use of the others.
Simply delete the interface=.. line and your dnsmasq should run fine.
Hth,
Oliver
On 28 Feb 2012 17:33:00 +0100, Helmut Hullen wrote:
Hallo,
on 2 schools in the neighbourhood we try to connect clients with the
server (DHCP and many other services) via DHCP.
With 1 NIC all works fine, something like
interface=eth0
dhcp-range=192.168.0.220,192.168.0.240,3d
allows static addresses (defined on the client), DHCP addresses
defined
by "dhcp-host=..." and "free" addresses from the above range.
When we install a second NIC (especially for the private smartphones
etc) and add the lines
interface=eth1
dhcp-range=192.168.4.10,192.168.4.250,1d
then we can see that pinging over the second card works, routing too.
When "dnsmasq" gets started then it also tells the new dhcp range.
But if the client has no fixed address then it never gets an IP
address
for the second NIC. We had reduced the range for the first card, we
remmed it out - nothing did help.
How have we to tell dnsmasq using the second card (and its dhcp
range)
too?
Viele Gruesse!
Helmut
_______________________________________________
Dnsmasq-discuss mailing list
Dnsmasq-discuss@lists.thekelleys.org.uk
http://lists.thekelleys.org.uk/mailman/listinfo/dnsmasq-discuss
_______________________________________________
Dnsmasq-discuss mailing list
Dnsmasq-discuss@lists.thekelleys.org.uk
http://lists.thekelleys.org.uk/mailman/listinfo/dnsmasq-discuss
