Hi, I send in my config: dhcp-option=option6:information-refresh-time,1h
Otherwise, Windows Clients never try to renew information from DHCPv6 (it looks like that to me, in reality its 86400 secs, which is the default if not specified). http://www.6net.org/publications/standards/rfc4242.txt confirms this: This document describes a Dynamic Host Configuration Protocol for IPv6 (DHCPv6) option for specifying an upper bound for how long a client should wait before refreshing information retrieved from DHCPv6. It is used with stateless DHCPv6 as there are no addresses or other entities with lifetimes that can tell the client when to contact the DHCPv6 server to refresh its configuration. Further details: 3.1. Constants We define two constants for use by the protocol. How they are used is specified in the sections below. IRT_DEFAULT 86400 In some cases the client uses a default refresh time IRT_DEFAULT. The recommended value for IRT_DEFAULT is 86400 (24 hours). The client implementation SHOULD allow for this value to be configurable. IRT_MINIMUM 600 This defines a minimum value for the refresh time. 3.2. Client Behaviour A client MUST request this option in the Option Request Option (ORO) when sending Information-Request messages to the DHCPv6 server. A client MUST NOT request this option in the ORO in any other messages. If the Reply to an Information-Request message does not contain this option, the client MUST behave as if the option with value IRT_DEFAULT was provided. In my opinion, dnsmasq should by default (like for stateful IPv4 leases) use the lifetime specified in the dhcp-range to request the clients to refresh this information. If it is explicitely given, of course use the information from option6:information-refresh-time setting. Uwe ----- Uwe Schindler H.-H.-Meier-Allee 63, D-28213 Bremen http://www.thetaphi.de eMail: u...@thetaphi.de > -----Original Message----- > From: Simon Kelley [mailto:si...@thekelleys.org.uk] > Sent: Saturday, July 27, 2013 3:04 PM > To: Uwe Schindler > Cc: dnsmasq-discuss@lists.thekelleys.org.uk > Subject: Re: [Dnsmasq-discuss] Make RA_INTERVAL configureable? > Deprecate old prefixes? > > On 26/07/13 17:50, Uwe Schindler wrote: > > > One thing I found in my investigations: The lifetime given in the > > dhcp-range for IPv6 oly affects the RAs, but not the time for > > refreshing the DHCP information request. I had to set it explicitely > > as dhcp-option6. > > > > What option are you sending? > > Simon. _______________________________________________ Dnsmasq-discuss mailing list Dnsmasq-discuss@lists.thekelleys.org.uk http://lists.thekelleys.org.uk/mailman/listinfo/dnsmasq-discuss