Not sure that will work, if memory servers, they may be different
threads. The original screw in feet of the AC-4 (shorter than the RV-4
feet, they were just half-rubber balls attached to screws) were to be
used to hold the AC-4 in the RV-4/RV-4C/MS-4 cases.
Loren - WA3WZR
On 1/15/2010 11:44 AM, Richard Palmer wrote:
Ok. Thanks all. I did not know the AC-4 was securely mounted to the
chassis of the RV-4 with screws. I was just sliding it in there. I see
I have the threaded type mount power supply. I also see that the feet
on the RV-4 are nutted. So I'll try to screw the RV-4's rear feet into
the bottom of the AC-4. That is two mount point short I know.
BTW. I read this all day long and am learning a lot, fast. Thanks again.
Kb8NXO
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.725 / Virus Database: 270.14.142/2623 - Release Date: 01/15/10
02:35:00
_______________________________________________
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist