Jim,
After re-reading your email I do believe your problem is with the
anti-backlash gear/bushing shown in your pictures 6 and 7 as you suspected. The
two anti-backlash gears are suppose to be tight and not easily move on the
brass bushing. I think you could probably tighten them up by placing the assy
in a vise and “ peening “ the aft gear at the brass bushing with something
round such as a socket or tube. The other possibility would be maybe to try
and solder the bushing to the aft gear. Like I said in my previous email the
gears are suppose to be tight on the brass bushing but at least one gear would
need to be slightly free to move for the anti-backlash to work. The gear assy I
have both gears will move on the bushing with some force applied.
73, Gary
_______________________________________________
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist
