On 18/07/2026 13:12, Mohit Dsor wrote: > On Thu, Jul 16, 2026 at 02:56:02PM +0200, Krzysztof Kozlowski wrote: >> On 16/07/2026 13:31, [email protected] wrote: >>> From: Sunyun Yang <[email protected]> >>> >>> LT9611C(EX/UXD) is an I2C-controlled chip that Receiver signal/dual port >>> mipi dsi and output hdmi, differences in hardware features: >>> - LT9611C: supports 1-port mipi dsi to hdmi 1.4 >>> - LT9611EX: supports 2-port mipi dsi to hdmi 1.4 >>> - LT9611UXD: supports 2-port mipi dsi to hdmi 1.4/2.0 >>> >>> Signed-off-by: Sunyun Yang <[email protected]> >>> Co-developed-by: Mohit Dsor <[email protected]> >>> Signed-off-by: Mohit Dsor <[email protected]> >>> --- >>> MAINTAINERS | 7 + >>> drivers/gpu/drm/bridge/Kconfig | 18 + >>> drivers/gpu/drm/bridge/Makefile | 1 + >>> drivers/gpu/drm/bridge/lontium-lt9611c.c | 1293 >>> ++++++++++++++++++++++++++++++ >>> 4 files changed, 1319 insertions(+) >>> >>> diff --git a/MAINTAINERS b/MAINTAINERS >>> index 6dea93a41962..30be2eaf2bec 100644 >>> --- a/MAINTAINERS >>> +++ b/MAINTAINERS >>> @@ -15184,6 +15184,13 @@ S: Maintained >>> F: Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml >>> F: drivers/gpu/drm/bridge/lontium-lt8912b.c >>> >>> +LONTIUM LT9611C MIPI DSI TO HDMI BRIDGE >>> +M: Sunyun Yang <[email protected]> >>> +M: Mohit Dsor <[email protected]> >>> +S: Maintained >>> +F: Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml >>> +F: drivers/gpu/drm/bridge/lontium-lt9611c.c >>> + >>> LOONGARCH >>> M: Huacai Chen <[email protected]> >>> R: WANG Xuerui <[email protected]> >>> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig >>> index 4a57d49b4c6d..b8959b8e2ad0 100644 >>> --- a/drivers/gpu/drm/bridge/Kconfig >>> +++ b/drivers/gpu/drm/bridge/Kconfig >>> @@ -177,6 +177,24 @@ config DRM_LONTIUM_LT9611 >>> HDMI signals >>> Please say Y if you have such hardware. >>> >>> +config DRM_LONTIUM_LT9611C >>> + tristate "Lontium LT9611C DSI/HDMI bridge" >>> + select SND_SOC_HDMI_CODEC if SND_SOC >>> + depends on OF >>> + select CRC8 >>> + select FW_LOADER >>> + select DRM_PANEL_BRIDGE >>> + select DRM_KMS_HELPER >>> + select DRM_MIPI_DSI >>> + select DRM_DISPLAY_HELPER >>> + select DRM_DISPLAY_HDMI_STATE_HELPER >>> + select REGMAP_I2C >>> + help >>> + Driver for Lontium DSI to HDMI bridge >>> + chip driver that converts dual DSI and I2S to >>> + HDMI signals >>> + Please say Y if you have such hardware. >> >> Please wrap the code to appropriate limits. > I checked the others in Kconfigs they appear to be similar, > still i will try to fix it.
This is nowhere close to the limit expressed by coding style. Best regards, Krzysztof
