On Thu, Jul 16, 2026 at 05:01:09PM +0530, [email protected] wrote: > From: Sunyun Yang <[email protected]> > > LT9611C(EX/UXD) is an I2C-controlled chip that Receiver signal/dual port > mipi dsi and output hdmi, differences in hardware features: > - LT9611C: supports 1-port mipi dsi to hdmi 1.4
So you need "if:then:" block disallowing port@1. > - LT9611EX: supports 2-port mipi dsi to hdmi 1.4 > - LT9611UXD: supports 2-port mipi dsi to hdmi 1.4/2.0 > > Signed-off-by: Sunyun Yang <[email protected]> > Signed-off-by: Mohit Dsor <[email protected]> > --- > .../devicetree/bindings/display/bridge/lontium,lt9611.yaml | 8 > ++++++-- > 1 file changed, 6 insertions(+), 2 deletions(-) > > diff --git > a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml > b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml > index 429a06057ae8..e0821a63d9d7 100644 > --- a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml > @@ -4,19 +4,23 @@ > $id: http://devicetree.org/schemas/display/bridge/lontium,lt9611.yaml# > $schema: http://devicetree.org/meta-schemas/core.yaml# > > -title: Lontium LT9611(UXC) 2 Port MIPI to HDMI Bridge > +title: Lontium LT9611(UXC/C/EX/UXD) 2 Port MIPI DSI to HDMI Bridge > > maintainers: > - Vinod Koul <[email protected]> > > description: | > - The LT9611 and LT9611UXC are bridge devices which convert DSI to HDMI > + The LT9611、LT9611UXC、LT9611C、LT9611EX and LT9611UXD These are some odd characters here. I guess this was in earlier versions as well... Best regards, Krzysztof
