WOW! That's for all the swift replys, simply a wealth of knowledge! Thanks a million guys! I'm off! 73, Bernie/WO2N.> ----- Original Message ----- From: "John F. Samuels" <[EMAIL PROTECTED]> To: "wo2n" <[EMAIL PROTECTED]>; <dx4win@mailman.qth.net> Sent: Saturday, November 16, 2002 10:24 PM Subject: Re: [Dx4win] CW keying
> You must reinstall DX4WIN, not reuse or copy it. During the new install it > will choose the correct drivers. > > 73, John, K2CIB > > ----- Original Message ----- > From: "wo2n" <[EMAIL PROTECTED]> > To: <dx4win@mailman.qth.net> > Sent: Saturday, November 16, 2002 9:11 PM > Subject: [Dx4win] CW keying > > > > Hi, I have a new computer with windows XP > > I installed a parallel card in a PCI slot and called it LPT2 > > DX4win loads and says "can't open cw driver" I have lpt2 setup in programs > > as keying port. > > What's wrong? Is it XP? > > Also CT won't key either only get one garbled transmission from inside > > computer. > > All wks well when connected to old win98 computer > > any ideas? > > Thanks Bernie/WO2N.> > > > > > > _______________________________________________ > > Dx4win mailing list > > Dx4win@mailman.qth.net > > http://mailman.qth.net/mailman/listinfo/dx4win > > > > >