Hi John,I was intrigued by your conclusion, so I have tried again:- Opened
f6gnz log containing all QSO's- Filter -> selection- Add->Replace this
name->Clublog- 2 clicks on each of 3 group names
- Update-OK-Save log as Clublog, logging window now shows Clublog instead of
f6gnz
-Filter-> selection- Found Clublog in pull-down list-Update->OK> Save Clublog
- Start f6gnz-Filter-> selection: Clublog NOT in pull down list
-Close F6GNZ, Open Clublog- Filter->Selection- Clublog in pull-down list
Conclusion:
PREVIOUS (multiple group) SELECTION NAMES CAN BE RECALLED IN PULL-DOWN LIST
ONLY AFTER OPENING THE LOG CONTAINING PREVIOUSLY SELECTED GROUPS. BUT THIS HAS
NO USEFULNESS!
SELECTION NAMES PREVIOUSLY CREATED FROM THE MAIN LOG (all QSO's), CONTAINING
MULTIPLE GROUP NAMES, SHOULD BE AVAILABLE IN PULL-DOWN LIST WHEN OPENING THIS
MAIN LOG, AFTER HAVING MADE NEW QSO's. THIS WOULD ALLOW PREVIOUS SELECTION'S
UPDATE, CONTAINING NEW QSO's MAKING PART OF THIS LOG, WITHOUT NEED TO RUN
THROUGH NEW FILTER CREATION AND SELECTION PROCEDURE!
SAVING THIS NEW LOG UNDER A NEW OR SAME NAME AS THE ONE CONTAINING PREVIOUS
SELECTION, WOULD PERMIT TO HAVE UPDATED LOG EACH TIME IT IS NEEDED.
Thank you for triggering my curiosity!
Best 73, Radi
Le Jeudi 18 février 2016 1h15, John Shaw <zl1...@gmail.com> a écrit :
Ah, puzzling?
Well it does work. Once you have setup and saved a group selection and or
date filter combination you should be able to go back and chose it again
from the list and re use it.
Maybe some one else can pick what is been missed?
73 John ZL1BYZ
_____
From: Radivoj Kar, F6GNZ [mailto:f6...@yahoo.com]
Sent: Thursday, 18 February 2016 11:24
To: John Shaw
Subject: Re: [Dx4win] Group filter/selection
Hi John,
This is exactly what I wanted to say: I do NOT find my previous selection
at the end of the drop-down list nor anywhere in it, as if I had never made
any selection! Only the selections that reflect the group names are
available+ All (00) !
73, Radi F6GNZ
Le Mercredi 17 février 2016 18h43, John Shaw <zl1...@gmail.com> a écrit :
Radi.
When you bring up the selection editor window, at the top it says current
selection then just below that is a box which probably says All QSOs, at the
right end of that box there is an arrow pointing down. If you click on that
arrow a list should drop down with all your previously made selection
filters. Do you find the selection filter you had previously made in that
list? I am hoping it is as then you just select it from there and click ok.
When you don't want that selection you go back and select all QSOs again.
Does this help?
73 John ZL1BYZ
-----Original Message-----
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Radivoj
Kar, F6GNZ via DX4WIN
Sent: Thursday, 18 February 2016 02:06
To: DX4WIN Reflector; Dx4win Support
Subject: [Dx4win] Group filter/selection
I have several Group names in my log and under the "Current selection" the
same names as names of the groups below are shown and can be chosen.If I
want to create a group filter that would include several groups, I click on
"Add" ,replace "this name" by the name of the wanted Group, for example
"Clublog", and double click on 3-4 wanted group names. After clicking on
"Update" and "OK" log reduces it's size and contains only the selected group
names.
Then, I can save it as "Clublog" and have it ready for exporting.
BUT: next time, after making new QSOs, I want to re-create a new "Clublog"
group file, containing old and new QSOs . I open my log containing All
Groups, select Group Filter and after clicking "Enable Filters" I expect to
see "Clublog" name within the proposed "Current selection" names, showing
the marked selected groups below. To my surprise, The "Clublog" selection is
no more indicated as available. I have to start all the procedure again,
"replace this name" by "Clublog", tick wanted groups, Update, OK, save as...
WHY? Why the created Group selection is not available after once being
created? If several such Groups are to be created and the procedure repeated
each time, it is not so practical.
Am I missing something???
73, Radi F6GNZ
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net <http://www.qsl.net/>
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net <http://www.qsl.net/>
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
