You have to configure and enable that pop-up window. The configuration is in the same area you configured the QRZ webpage info
K4TK Tim Moore On Fri, Jan 3, 2020, 8:26 AM Mike Newey <m...@valleypm.plus.com> wrote: > Thanks Tim for the help. > > > > If I enter a call sign in the QSO window and then press only F3 nothing > happens. If I press Alt+F3 then the QRZ website page opens with the call > signs name and address. > > > > Mike G4SND > > > > *From:* Tim moore [mailto:redval...@gmail.com] > *Sent:* 03 January 2020 13:28 > *To:* Mike Newey > *Cc:* Jim Reisert AD1C; Mike Cizek W0VTT; DX4WIN Reflector > *Subject:* Re: [Dx4win] Mailing list submission > > > > The Lookup window or external data pop-up window comes up after entering > JUST F3. Alt F3 actually brings up the external data source, as in the QRZ > website. F3 on the other hand brings up the other pop-up window, and from > there you can right click and chose the automatic update choice > > > > K4TK > > > > Tim Moore > > > > On Fri, Jan 3, 2020, 5:02 AM Mike Newey <m...@valleypm.plus.com> wrote: > > Jim > > Thanks for the reply to this question and to everyone that contributed. > > I realise that ALT+F3 will update the external data (QRZ). The original > post from Arthur Caswell was asking if it is possible to update this > automatically without hitting Alt+F3 (I think). It seems that this is not > possible. I have tried what you suggest Jim but cannot find the automatic > update box to check. Which window is this on? > I have entered a call sign in the real time box on the QSO window and then > pressed Alt+F3 and the QRZ window initiates with the call sign details of > the station entered. Where is the box to check for automatic update? > > 73 Mike G4SND > > Copied text from Jim > But the very first time you do this (ever), right-click on the > Callsign/Mgr Lookup (F3) window and make sure that the Automatic Update > (at the bottom) is checked. This allows the window to update as you > scroll through your log, as well as update when you are entering a new > QSO. Once you check this setting, you'll never have to do it again. > > -----Original Message----- > From: Jim Reisert AD1C [mailto:jjreis...@alum.mit.edu] > Sent: 02 January 2020 21:45 > To: Mike Cizek W0VTT > Cc: Mike Newey; DX4WIN Reflector > Subject: Re: [Dx4win] Mailing list submission > > On Thu, Jan 2, 2020 at 11:17 AM Mike Cizek W0VTT wrote: > > > The Automatic Update feature updates the info displayed in the > Callsign/Mgr > > Lookup window as you scroll through the log. > > > > Hit <F3> to display the window. Make sure your user name and password > are > > entered in File > Preferences > Ext Data and you have Online Callsign > lookup > > enabled. The proper URL for QRZ lookup should be pre-loaded into the > > address windows. > > But the very first time you do this (ever), right-click on the > Callsign/Mgr Lookup (F3) window and make sure that Automatic Update > (at the bottom) is checked. This allows the window to update as you > scroll through your log, as well as update when you are entering a new > QSO. Once you check this setting, you'll never have to do it again. > > This is no automatic way to get that data into the logbook, however. > You must click on the Update QSO button to do that. > > -- > Jim Reisert AD1C, <jjreis...@alum.mit.edu>, http://www.ad1c.us > > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
