No, there are no differences of which I am aware. I simply wanted to advise the settings which I successfully use for the benefit of anyone having difficulties. The reason I have set up my Pro II to be addressable as a Pro was that at the time the Pro II was not a selection option in WriteLog. This may have changed, but I have not changed that which is working.
Ron N5IN Oystein Stokkeland wrote: >Do you mean that there are any functional difference in the way DXbase >controls the PRO and PROII ?? > >73 de > >Øystein Stokkeland LA7QI >Tel: +47 51 67 70 97 / +47 971 56 090 >email: [EMAIL PROTECTED] > >*****Representant i Norge for DXbase logging program***** > > > >-----Original Message----- >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On >Behalf Of Ron Stordahl >Sent: 21. mars 2004 16:34 >To: [email protected] >Subject: Re: [DXBase] ICOM 758ProII > >There have been some recent questions about computer control of the Icom >756Pro and Pro II. > >Here are the settings which are successful for me: > >While I have the Pro II I use the Pro address. This is because at one time >WriteLog did not have a selection option for the Pro II, thus I set my Pro >II interface address at '5C' so it would be addressable as a Pro, and I have >never changed it back. > >In DXBase2004 I have the software options set as: > >Icom IC-756PRO >COM1 (although it also works with all my 10 com ports resulting from the >installation of 2 Byterunner 4 port PCI cards) >19200/8/1 (also works fine at 9600, but this seems just a tad faster) >Parity NONE DTR HIGH (Actually works just as well with this unchecked) > >In the radio I have these settings: > >CI-V Baud Rate 19200 >CI-V Address 5ch >CI-V Transceive ON >CI-V w/IC731 OFF > >I am using the ICOM CT-17. > >I have it connected to the computer with an off the shelf DB9 to DB25 Modem >cable. This cable connects all 9 pins from the DB9 to the appropriate pins >on the DB25, plus shield. This cable is overkill, probably only 3 wire >would need to be run, but it was available prebuilt, so I used it. > >Ron N5IN >_______________________________________________ >DXBase Reflector - Please visit us on the web at www.dxbase.com >- - - - - - - - - - - - - - - - - - - - - - - To UNSUBSCRIBE please visit: >http://mailman.qth.net/mailman/listinfo/dxbase > > > >_______________________________________________ >DXBase Reflector - Please visit us on the web at www.dxbase.com >- - - - - - - - - - - - - - - - - - - - - - - >To UNSUBSCRIBE please visit: >http://mailman.qth.net/mailman/listinfo/dxbase > >
