>From the Menu or Icons, choose the Selection Wizard. In the Output Type...select 'ADIF File' If you ONLY have one callsign in this log, leave Opr.Call blank If you have multiple calls you have to select the specific call who's qso's you are uploading.
Make sure all other options are blank. Click on the QSO Filters button. I put a check in No LOTW Submitted. (this will select only the qso's not PREVIOUSLY marked as submitted to LoTW) Again make sure no filters are ticked. (If a filter is ticked, you may only get some qso's or omit some qso's) Click OK Double check your settings and then Click Start You will be asked where you wish to save this new adif file and what you wish to name it. I created a Folder in My Documents called ADIF Uploads and I select to save it there with a name of mycall.adi. Then you will asked if you want DXBase to mark all these selected qso's as being submitted to LoTW. (for now I'd say no, in case you make a mistake and have to retry, there is no problem resubmitting a previously submitted qso as it will just replace the previous one and cause no damage at all) the Wizard will start selecting and you will see the number increase as it selects qsos If the selection number equals the qso's in your log...you did it right... Good luck ----- Original Message ----- From: "Neil Foster" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Saturday, October 08, 2005 9:08 AM Subject: [Dxbase] LOTW >I am using DXbase 2006 and need to know how to convert my logs to ADIF format >and submit >them to the ARRL. > Many thanks, > Neil N4FN > > All messages and attachments are scanned with McAfee Anti-Virus > No trees were killed in the sending of this message. However, a great number > of > electrons were inconvenienced. > ______________________________________________________________ > Dxbase mailing list > Home: http://mailman.qth.net/mailman/listinfo/dxbase > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] >
