Doug, The setup with CW Skimmer is about the same as for LP-Pan. CW Skimmer is only the software, and it needs a baseband signal having I/Q outputs to operate. Such a signal can be obtained from LP-Pan, or a Softrock receiver, or a variety of other SDR devices that provide I/Q signals to the soundcard inputs.
I also note that there is a slight inconsistency between those "bulleted features" and the P3 manual. The manual states that its INPUT should come from a buffered IF output on the transceiver, however the P3 OUT signal comes from a 3 dB splitter - it apparently is not separately buffered in the P3. 73, Don W3FPR On 8/28/2011 5:51 PM, DOUGLAS ZWIEBEL wrote: > Buffered IF output to drive other equipment (CW Skimmer etc.) ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html