If the transistors ran at >28V and it had a built-in PS it might be worth the price.
--- On Sat, 8/11/12, Adrian <vk4...@bigpond.com> wrote: Specifications Amplifier typical gain: 13db RF input: 1 to 20 watts Operating Voltage: 13.8 volts +/- 15% (20 amp power source required) Frequency Range: 160 through 6 meters (ham bands only) RF output Power: 100 Watts, +/- 1 db (with typical 5 watts drive) Operating Modes: AM, FM, AFSK, PSK, SSB, CW Duty Cycle: 50% (TX/RX) 100 watts output. 100% for CW and SSB Front Panel Display: Custom FSTN monochrome LCD Display Back Lighting: 6 LEDs,for more than 200 color options Cooling: 2 internal fans, temperature controlled Harmonic & Spurious Outputs: -50dBc Typical @ 100 Watts HF, -60dBc Typical 6 Meters Third Order Intermod: 30 dB below peak Dimensions (HxWxD): 3.625" x 6.5" x 7.6" (excluding feet and connectors) Weight: 5.4 lbs DC Power Connector: Power Poles Fuse (back panel): 25 Amp, Automotive Blade Style Key Jack: 1/8" Stereo Tip-Key In Ring-Key Out ACC Din Connector: 8 Pin DIN, Key In, Clock/Data/Enable, Ground Construction: Molded Plastic bezel, Aluminum chassis, front & rear panels & textured painted steel covers Antenna Impedance: 50 ohms nominal Automatic fault for: Antenna mismatch(output power >50 watts), Over current, Over temperature, and high input power Works with most antennas (SWR less than 3:1) Easy plug and play operation with Ten-Tec model 539 QRP radio Separate antenna connector provided for automatic switch to six meter antenna Works with most QRP radios RF connectors: 1 RF input, 3 RF outputs (two HF & One 6 meter) Amplifier keyed from direct connection to foot switch, hand switch, or straight key. Key Out from amplifier is provided to key radio. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
