Hi, The frequency data is not available on the *AUX* bus. On the serial port this data is of course available but to make it available to KAT500 would involve at least one PC software program. I have in mind to ask Larry Phipps if maybe he could add a feature to LP-Bridge to feed the frequency data out one of the output virtual ports. The utility could then listen to that port and send the data to the KAT500. This is getting rather complicated and involves a number of developers working together.
AB2TC - Knut Keith-K5ENS wrote > +++++1) Elecraft says that this data is NOT available at the output of the > K3; +++++ > > > The K3 can be polled for this data. Many loggers are doing it. There is > even some software that is polling data from the logger at the same time. > > Keith -- View this message in context: http://elecraft.365791.n2.nabble.com/KAT500-and-OT-Is-a-tuner-using-VNA-feasible-tp7567559p7567641.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html