LP-Bridge alone will not help. While K3 Utility can obtain the
frequency information through LP-Bridge, that information would only be
sent out the same serial port back to the K3 - nothing gained. Remember
that the KAT500 uses a different serial connection than does the K3, so
that data would have to be sent to the KAT500 via a different serial
port (not connected to the K3).
73,
Don W3FPR
On 12/24/2012 3:00 PM, ab2tc wrote:
Hello again,
A simpler way that would only involve changes to the KAT500 utility would to
have the utility talk to both the K3 and the KAT500. Even if the K3 is
already busy talking to a logging program, LP-Bridge unmodified can fix that
conflict. So now we have just created more work for Dick.
AB2TC - Knut
PS, Merry Christmas to all.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html