Howdy K3' people: I have an SDR/IQ. I also have three Elecraft transverters. When I connect a BNC to the BNC-RX "T" chain, and I tune Spectravue to 28.07 and the 6m xv50 transverter is "on", I am looking at the area around 50.070 .. I can look for beacons and Sporadic-E openings.
Nothing new. However, the other day, I suspected the xv50 transverter to on the Fritz. So I switched to the internal 6m Rx/Tx section. Made some contacts. So now I want to once again look for 6m Beacons down below 50.080 . My only option seems to be the IF BNC output. I connected there and tried to set Spectravue for 8.215; 10.0; 28.0 and still see nothing from 6m. I even tried to set it at 50.10, to no avail. So how do yu set it up to watch lower end of 6m on the K3, without using a transverter? thanks -- 73 KD7YZ Bob ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
