------------ ORIGINAL MESSAGE ------------(may be snipped) On Sat, 13 Sep 2014 12:36:40 +0600, UA9CDC wrote:
>I do not have ACOM2000 but I use the same arrangement with Expert 1-KFA and >K3. Logging program polls the radio and the amp only "listens" for K3 >response to learn the operating freq. When you terminate logger there is no >polling anymore. Therefore the system does not work as expected. This is >normal. REPLY: So the K3 does not send data unless polled? OK, now things make more sense. This explains why, if you're not using the Y connector to your computer, your data cable must have the TXD wire so the ACOM can poll the K3. Is my assumption correct? The ACOM does poll the K3 in that case? Things are finally coming clear. I wish this had been explained in the ACOM manual. Many thanks to all who replied on this issue. 73, Bill W6WRT ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
