Rich,
I am not certain if it answers your question, but the ALT button
switches between sidebands in SSB mode. It is available as SWH17;
Or the mode can be set explicitly with the MD command.
73,
Don W3FPR
On 3/4/2015 7:40 AM, Rich - K1HTV wrote:
Hi Wayne,
Thanks for the 'CW REV' reminder. Since the K3 remembers the sideband last
programmed for a band I wish that there was a simple SSB mode change command
which could be used in macros rather than a specific USB or LSB command.... or
does this command already exist already? I believe that when I wrote the
macros a few years ago I confirmed that such a command it wasn't available.
Thanks for a great radio. Next thing to do, after the dust settles, is to
upgrade the sync boards used for the main and sub receivers.
73,
Rich - K1HTV
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
