WSJT not running – K3S not connected to PC. I still need to reset PTT-KEY after a power cycle – it always goes back to OFF-OFF. The same thing happens in USB or DATA modes.
Danny, G3XVR From: Don Wilhelm Sent: 23 May 2016 06:26 To: danny.higgins; Vic Rosenthal 4X6GP/K2VCO; elecraft@mailman.qth.net Subject: Re: [Elecraft] PTT KEY CONFIG setting volatile? Danny, Do a test without WSJT running. Set PTT key config to DTR - OFF, then cycle power on the K3S. Does that setting survive the power cycle? If so, it is not a K3S problem, look to the WSJT software for the solution. If it does not survive the power cycle, contact K3Support. 73, Don W3FPR On 5/23/2016 1:08 AM, danny.higgins wrote: > I have this on my K3S with the latest firmware. I use WSJT to key the K3S via > the USB port and I operate in USB mode, not Data. Every time I power the K3S > OFF I need to reset the PTT Key config to DTR – OFF. > > Danny, G3XVR > > > From: Vic Rosenthal 4X6GP/K2VCO > Sent: 23 May 2016 04:29 > To: elecraft@mailman.qth.net > Subject: Re: [Elecraft] PTT KEY CONFIG setting volatile? > > Which radio is it? I've never seen this on my K3. > If you are running some kind of rig control software, try it with the > software not running. > > 73, > Vic, 4X6GP/K2VCO > Rehovot, Israel > http://www.qsl.net/k2vco/ > > On 23 May 2016 05:51, Ken Arck wrote: >> Sounds like a call to Elecraft tomorrow because this is repeatable! >> >> >> >> >> At 07:42 PM 5/22/2016, Cady, Fred wrote: >>> That doesn't sound right. I don't think mine has ever changed. >>> Cheers, >>> Fred KE7X >>> >>> ________________________________________ >>> From: Elecraft <elecraft-boun...@mailman.qth.net> on behalf of Ken >>> Arck <k...@arcomcontrollers.com> >>> Sent: Sunday, May 22, 2016 4:23 PM >>> To: elecraft@mailman.qth.net >>> Subject: [Elecraft] PTT KEY CONFIG setting volatile? >>> >>> I notice the PTT KEY selection under CONFIG doesn't appear to be >>> non-volatile as when the radio is power cycled, it always reverts to >>> OFF - OFF. I'd like it to stay set to DTR -- RTS but it doesn't >>> >>> Even if I leave 13.8 to the radio, turning it OFF and back ON and >>> that setting reverts. >>> >>> Ken > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to danny.higg...@keme.co.uk > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to donw...@embarqmail.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
