Carefull. Are they wire-wound power resisters cased in ceramic. If so they are likely inductive and of marginal use as withvRF they will not be just resistive but somewhat inductive and this will skew your results.
Sent from my iPhone ...nr4c. bill > On Dec 27, 2016, at 9:43 AM, Paul C <paul...@sbcglobal.net> wrote: > > I made my own dummy load last night from two 100 ohm resistors wired in > parallel. They are rated for 10 watts each and look like little bricks. I > measured the resistance at 51 ohms. Do you think this is close enough or > should I reduce it to 50? > > Paul KG5KXG > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
