I'm new to Elecraft (1 year), but with almost 30 years in IS/IT... I always do the best I can to minimize potential problems when flashing firmware.
This includes using a laptop or computer running with a truly uninterruptible power supply. A fresh COLD reboot of the computer and radio for EACH flash. Oh, and as suggested in the manual and/or the Cady book... BACK UP YOUR FIRMWARE and SETTINGS!! I save mine every time I make a change. Storage space is cheaper than keeping a log of changes between downloads. ______________________ Clay Autery, KY5G MONTAC Enterprises (318) 518-1389 On 1/28/2017 3:02 PM, Bob N3MNT wrote: > If you did the upgrade one after the other, it is possible that the com port > used in the first update was not released for the second unit until you > closed it either manually or via reboot. > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com