If CONFIG:PB CTRL is set to .01 in CW mode, then, per the function
description in the K3 Owners Manual (pp. 62 in Manual Revision A1), you
will be limited to the Shift/Width controls mode only. Change PB CTRL to
.05 and you will also enable LO/HI cut on the controls.
73,
Mike
On 2/26/2017 10:13 AM, Ted Bryant wrote:
In playing with Bob N6TV's suggested settings, I've discovered that on CW,
neither the Shift->LO Cut nor the Width->HI Cut controls change functions
when tapped. They appear fixed at SHIFT and WIDTH. Tapping them merely
displays their current setting. On SSB, they change and work as expected.
Is there a parameter setting somewhere that affects this? I've looked
through the release notes but see nothing.
Using the latest firmware: 5.57
73, Ted W4NZ
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
