Jim,
Your mic gain is on the high side. If you have the mic gain range set
to "Low", try changing it to "High" and lowering the gain to the 10 to
15 range.
Turn compression to zero while the mic gain is adjusted for 5 to 7 bars
(7 on peaks) on the ALC meter. After making that setting increase the
compression to whatever you desire - most like to run compression in the
10 to 15 range.
See if you can borrow someone who can see the ALC meter while you talk.
Set the K3 to TX TEST so you don't send RF while you make those adjustments.
73,
Don W3FPR
On 3/26/2017 5:38 PM, Jim Kutsch wrote:
The mic gain is set to 45 and compression to 10. Those seemed to give the
correct indication in the ALC meter but the distortion still occurs with 0
compression. I cannot read the ALC indicator myself due to no vision so had
another local ham assist with that part of the K3S setup.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
