Jim,
With that new information, I suggest you email K3support to see if they
can add anything and suggest a fix. Let them know the serial number of
your K3S as well as the firmware level.
73,
Don W3FPR
On 3/26/2017 7:02 PM, Jim Kutsch wrote:
Some progress but some new questions. When transmitting at 12 Watts without
the KPA3 engaged, the transmit audio is completely fine. But, once I go to
13 Watts and hear the KPA3 relay engage, the audio distortion is back. I'm
beginning to think I have a CONF setting incorrect or the KPA3 is bad. Even
with 12 W driving the KPA500, no audio distortion.
The K3S has the KPA3 module but does not have the KAT3 since I'm using the
KAP500.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
