Jim On my Win 10 machine I can tell by going to *Device Manager*,* Ports*, selecting the specific port in question, then right clicking and going to *Properties*. There, on all of my USB connections, it says "*Manufacturer: FTDI*". Hope that will help.
73, Bill W3UL On Mon, Aug 14, 2017 at 12:27 PM, Jim Reisert AD1C <jjreis...@alum.mit.edu> wrote: > I need some help from the reflector. First of all, I am NOT a K3 > owner. I am helping a friend remotely who is 2000 miles away. > > His computer was running Windows 10 and was previously working with > the K3, both with the K3 Utility as well as DX4WIN. I had to rebuild > the computer from scratch after a number of software problems > developed. His microHAM device with several virtual COM ports is > working fine (it's interfaced to a Ten-Tec Orion). It's only the K3 > that we're having problems with. > > I have been referring to this page: > > http://www.elecraft.com/K3/k3_software.htm > > First of all, regarding this statement, "Elecraft offers the KUSB > serial-to-USB cable for USB only computers etc. Our cable was > originally provided using a Prolific chip set but since approximately > July of 2010 we have been shipping KUSB cables which use the FTDI chip > set." > > How do I determine which chipset he has? Other than the virtual COM > ports for the microHAM device, I see two other ports: > > One that says simply, "USB Com Port 3" > > Another port mentions a Silicon Labs driver, and it shows up on COM10. > > There is no overlap of any COM port numbers. > > I have tried both DX4WIN and the K3 utility with both COM ports (3 and > 10). While there are no "unknown port" errors, neither program can > communicate with the K3 on either port. So something is missing and I > do not know what that is. > > Again, I am trying to do this remotely, so it's hard for me to pull > cables, etc. to try to figure out what's going on. > > Can someone please suggest a course of action for me to try to debug > this problem? Mainly, I don't know which of the two COM devices above > *may* be for the K3, and whether the correct driver is installed. > > Thanks & 73 - Jim AD1C > > -- > Jim Reisert AD1C, <jjreis...@alum.mit.edu>, http://www.ad1c.us > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to w3ul.b...@gmail.com > -- 73, William (Bill) Rogers / W3UL Annapolis, Maryland U.S.A. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com