Mike, I don't think I have seen this as a suggestion so far in the thread.
It is important that you dress the cables for the SVGA option exactly as shown in the installation manual.
If they do not want to stay in place, use a ty-wrap around the cables. 73, Don W3FPR On 2/11/2018 12:50 PM, mjpilgrim wrote:
I am almost overwhelmed by all the very thoughtful suggestions. Here's what I know so far. I had previously performed the idea of turning off all items in the room except for the radio and P3, but the reported symptom remains. I then switched my antenna switch to the grounded position, and the problem goes away......... Now my suspicion is that my rfi is created from outside my house. My antenna system consists of two end fed long wires, 90% opposed to each other, and a minimal vertical out behind the house.
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
