I found that not all RG-8X is created equal. For one project, I
measured 3 or 4 different brands of new RG-8X to find that the loss can
vary considerably. The measurement method was to use 50 ft, snake it
back an forth across the floor so as not to have adjacent coupling, the
ends fitted with N type connectors and connected to my Spectrum Analyzer
with tracking generator. Normal meaningful sweep was 0.1 MHz to 1
GHz. I don't recall the numbers but I was a bit surprised to find
significant difference as I recall. The project was in preparation of
antennas for Field Day operation.
73
Bob, K4TAX
On 2/26/2018 4:28 PM, j...@kk9a.com wrote:
The original post by W4KBX was this: "I’m seeking recommendations for
RG-8X coax with the lowest loss. The total run will be about 100 feet."
You cannot defy physics and have low loss with 1/4" coax, no matter who
the manufacture is, but RG8X was his criteria.
John KK9A
Jim Brown K9YC wrote:
On 2/26/2018 11:02 AM, Bob McGraw K4TAX wrote:
I did inquire as to the application. To feed a 6M yagi being a 6OWL6W.
My thinking, I would cringe at putting up a nice yagi such as this and
not use the feedline with the lowest loss possible. Most likely Andrew
LDF4-50A hardline.
Me too! The 350 ft run from my shack to the 3-el SteppIR is 7/8-in
hardline, transitioning to a short length of flexible coax for the
rotator loop. Scrounged the hard line used for roughly $1/ft. Loss is
about 1 dB on 6M.
73, Jim K9YC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to rmcg...@blomand.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com