My K3s arrived over the weekend and I have been setting it up. I am using the rear Audio jacks to drive either headphones, or the Line out to drive an amplifier and two speakers in the stereo mode.
The headphone jack has stereo output ok. But the line out only has right channel audio. Left channel has nothing but a low hum. I am testing them one at a time, using the same cable. So it is not a case of a bad cable. The plug inserts to the same depth in both the headphone and line out jacks, so I believe the plug is properly inserted, I have been through both the Main Menu and Config menus, item by item. I see nothing that would give the option to turn off the left channel of the line out. Anyone have any suggestions? Thanks, Dave, K4TO ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com