My station has a relay system for switching the headphones between two different radios, among other things. I had to add isolation transformers for the same reason the K3 has them on the line outputs. The loss in the transformers reduces the audio level too much for the rear panel headphone jack to drive two sets of the low sensitivity headphones I use. And I don't want a cable in the way to the front panel.

That's why it's "complicated".

73,
Scott K9MA

"Everything should be as simple as possible, but no simpler." -- Albert Einstein



On 1/15/2019 23:38, Don Wilhelm wrote:
Last Field Day, my K3 was used at the CW station.  Two sets of headphones.  One for the operator and one for the logger. One was plugged into the rear panel Phones jack and the other was plugged into the front panel jack.  No problem, no splitter. Ok, if there were folks nearby who wanted to listen in, we would simply turn on SPKR+PHONES in the menu, and the speaker could also be heard.

Very versatile.  Why make it complicated - the K3 gives us the tools to do it 'the easy way'.

73,
Don W3FPR

On 1/15/2019 11:23 PM, K9MA wrote:
I found that the level at headphone output, at least the rear panel one, was too low to drive two pairs of headphones in parallel in my setup, which includes some isolation transformers. The speaker output works fine with the headphones. (Don't try this with super sensitive low impedance headphones.) I just wired a switch to an external speaker.

73,
Scott K9MA

On 1/15/2019 20:51, Nr4c wrote:
Why use Line Out for speakers. There is a perfectly good jack marked Speakers right next to the Phones jack. Be sure and use a Stereo plug but it is for ........wait for it.  Speakers!


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k...@sdellington.us


--
Scott  K9MA

k...@sdellington.us

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Reply via email to