Hello Tom,

> I ran my K2 last weekend on a battery (from my backyard – fully
> charged 52 Ah. Gel cell), and everyone on the net (40 meter SSB)
> complained that the signal was distorted and just plain sounded very
> bad.  One person suggested that it was the 12 volts put out by the
> battery, rather than the typical 13.8 volts.  I brought out my power
> supply and everything worked fine.  I guess it was surprising that
> this radio, that I understood was for portable operation wouldn’t
> work well on battery power.  Has anyone else experienced this or is it
> unique to my radio?  This is a 4000 serial number.  I have on order
> the W4RRY battery booster.  By comparison, my FT-857 seems unaffected
> by 12 volts.  Tom W6EIJ 

I don't have newer any problem with my K2 at battery voltage lower than
12 volts. Sometime I work with my K2 (#01118) until the transceiver
beeps in my ears, because the voltage is under 11 volts or so.
--- 
72/73 de Ingo, DK3RED - Don't forget: the fun is the power!

   [EMAIL PROTECTED] - www.dk3red.homepage.t-online.de
     DL-QRP-AG   #824 - www.dl-qrp-ag.de
      QRP ARCI #11295 - www.qrparci.org
        DARC #2360404 - www.darc.de




_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply via email to