Yes, but can you have a dynamic mic plugged into one and an electret mic plugged in the other?
The K3/K3S has never supported this, and to this day, annoys the heck out of me, since I have a Heil HC-4 headset (which is dynamic and plugged in the rear connector) and an Elecraft hand mic (which is Electret). I have to go digging through the menus to turn the bias on/off every time I want to switch mics. On the plus side, mic HI/LOW gain is separate for front/rear connectors, but NOT the bias setting. Hopefully, this has been fixed for the K4. Separate TX equalizer curves should be also be supported, as well, along with mic gain, compression, etc. 73, -- Dave, N8SBE -------- Original Message -------- Subject: Re: [Elecraft] Handedness From: Wayne Burdick <n...@elecraft.com> Date: Sun, June 02, 2019 11:47 am To: Nr4c <n...@widomaker.com> Cc: Elecraft Reflector <elecraft@mailman.qth.net>, w7aqk <w7...@cox.net> Yes. You can have phones and mics plugged in both front/rear at the same time. Wayne port this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
