I use macros on pf1 and pf2 to do this. Also on KPOD. Sent from my iPhone ...nr4c. bill
> On Jun 3, 2019, at 2:32 PM, Dave New, N8SBE <n8...@arrl.net> wrote: > > Yes, but can you have a dynamic mic plugged into one and an electret mic > plugged in the other? > > The K3/K3S has never supported this, and to this day, annoys the heck > out of me, since I have a Heil HC-4 headset (which is dynamic and > plugged in the rear connector) and an Elecraft hand mic (which is > Electret). > > I have to go digging through the menus to turn the bias on/off every > time I want to switch mics. On the plus side, mic HI/LOW gain is > separate for front/rear connectors, but NOT the bias setting. > > Hopefully, this has been fixed for the K4. Separate TX equalizer curves > should be also be supported, as well, along with mic gain, compression, > etc. > > 73, > > -- Dave, N8SBE > > -------- Original Message -------- > Subject: Re: [Elecraft] Handedness > From: Wayne Burdick <n...@elecraft.com> > Date: Sun, June 02, 2019 11:47 am > To: Nr4c <n...@widomaker.com> > Cc: Elecraft Reflector <elecraft@mailman.qth.net>, w7aqk <w7...@cox.net> > > Yes. You can have phones and mics plugged in both front/rear at the same > time. > > Wayne > > > port this email list: http://www.qsl.net/donate.html > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
