I use PF1 to switch between front mike input, no bias, and rear mike
input with bias.
73
Bob, K4TAX
On 6/3/2019 1:53 PM, Rick WA6NHC wrote:
On 6/3/2019 11:32 AM, Dave New, N8SBE wrote:
Yes, but can you have a dynamic mic plugged into one and an electret mic
plugged in the other?
Yes! Or at least enough to accomplish what you're seeking.
I have the Yamaha CM500 (required bias on) plugged in the rear and the
Kenwood (MC-60, no bias) desk mic plugged into the front.
I simply switch to the mic desired in the menu, which could also be
done via macro. The K3 remembers which needs bias or not, once set.
The K3/K3S has never supported this, and to this day, annoys the heck
out of me, since I have a Heil HC-4 headset (which is dynamic and
plugged in the rear connector) and an Elecraft hand mic (which is
Electret).
I have to go digging through the menus to turn the bias on/off every
time I want to switch mics. On the plus side, mic HI/LOW gain is
separate for front/rear connectors, but NOT the bias setting.
Hopefully, this has been fixed for the K4. Separate TX equalizer curves
should be also be supported, as well, along with mic gain, compression,
etc.
73,
--
Rick NHC
Dave, N8SBE
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
