Andy - You bring up some good points, and I will be watching for the input from the assembled brain trust.
One issue I have with the KAT500 is that it only goes down to 160 meters. My previous tuner would handle much lower frequencies, allowing me to work 630 meters. No such luck with the KAT500. If there is a workaround, I'd like to hear what it is. Also keep in mind that tuning it on "off band" frequencies requires that you transmit a signal of at least a minimal value ... which is technically not legal. 73 Lyn, WØLEN -----Original Message----- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Andy Durbin Sent: Saturday, March 07, 2020 11:10 AM To: elecraft@mailman.qth.net Subject: [Elecraft] KAT500 antenna selection The KAT500 has continuous frequency coverage for saving and selecting tuning solutions and is not constrained to amateur band limits. However, the antenna selection can only be defined for the amateur bands. Does the KAT500 simply use the antenna selection defined for the amateur band closest to the out of band operating frequency? 73, Andy, k3wyc ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to l...@lnainc.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com