Andy
I didnt say set the operating frequency. I said tuning it. 73 Lyn, WØLEN From: Andy Durbin [mailto:a.dur...@msn.com] Sent: Saturday, March 07, 2020 1:22 PM To: elecraft@mailman.qth.net; l...@lnainc.com Subject: Re: [Elecraft] KAT500 antenna selection "Also keep in mind that tuning it on "off band" frequencies requires that you transmit a signal of at least a minimal value ... which is technically not legal." No that's not true. The KAT500 can be set to any frequency within its operating range by sending it the frequency on the serial bus using either the "F" word or the "FA" word. See the "KAT500 Serial Command Reference" for more detail. No transmission is required to set the operating frequency of a KAT500. 73, Andy, k3wyc ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com