The KAT500 utility sends EEINIT; SET format: EEINIT; erases EEPROM containing frequency memories, per-band settings and all configuration selections, including the current RS-232 speed. Configuration and per-band settings are formatted to default values during restart after a microcontroller reset. EEINIT; does not change the KAT500 serial number or its fault table.
RST0 and RST1 have to do with resetting (restarting) the microcontroller. 73 de Dick, K6KR -----Original Message----- From: elecraft-boun...@mailman.qth.net <elecraft-boun...@mailman.qth.net> On Behalf Of Andy Durbin Sent: Friday, December 4, 2020 09:29 To: elecraft@mailman.qth.net Subject: [Elecraft] KAT500 lost serial comms - try factory defaults? "2. What antennas are enabled after a factory reset?" On all bands ANT 1, 2, and 3 are enabled and "preferred" is set to "last used" I don't know what the Utility sends for "Reset Configuration". The documented reset command is: RSTx (Reset, SET only) SET format: RST0; or RST1; RST0; resets the microcontroller without saving state in EEPROM. This is equivalent to removing the power plug and plugging it back in again. RST1; simulates pressing the power off button which saves current state in EEPROM before reset. RST may be ignored while transmitting. Neither RST0; nor RST1; appear to clear the memorized settings so I suspect the Utility uses another command. Now I may have to find out what that is .... 73, Andy, k3wyc ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to d...@elecraft.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com