"2. What antennas are enabled after a factory reset?" On all bands ANT 1, 2, and 3 are enabled and "preferred" is set to "last used"
I don't know what the Utility sends for "Reset Configuration". The documented reset command is: RSTx (Reset, SET only) SET format: RST0; or RST1; RST0; resets the microcontroller without saving state in EEPROM. This is equivalent to removing the power plug and plugging it back in again. RST1; simulates pressing the power off button which saves current state in EEPROM before reset. RST may be ignored while transmitting. Neither RST0; nor RST1; appear to clear the memorized settings so I suspect the Utility uses another command. Now I may have to find out what that is .... 73, Andy, k3wyc ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com