On 6/22/2025 3:38 PM, Roger Rose wrote:
I operate 99.9% CW and don’t want a mic cluttering up my operating position. I use a Shure 444 connected to the rear apron. It has a 3 conductor plug on it from back in my QRP days for use with a TenTec Argonaut 515. I built a short adapter cable with a 1/4” inline jack with leads to MIC and PTT IN. A friend with a 3D printer made me a nice cap for the front panel. Works quite well.
That's a near ideal mic for communications use. It's response is very carefully shaped for speech intelligibility. Some pretty smart hams wee working at Shure when they developed it. I've used one in my station before W6XU, another pro audio guy, turned our contest club on to the wonderful Yamaha CM500 gaming headsets.
73, Jim K9YC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
