David, The voltage measurements at Q17 please!
73, Don W3FPR > -----Original Message----- > Thanks, > Here's the measurements. > Note: the transistors are quite close to the board, so I had to figure > out which adjacent pad to tap; I think I have measured correctly. > > > The DC Voltages at Q18 are: > > Point Measured Chart > ----- -------- ----- > Gate: 0.00 -1.0 > Source: 3.19 2 to 3 > Drain: 8.02 6.3 > > ! > > Q16: > > Point Measured Chart > ----- -------- ----- > Emitter: 0 0.0 > Base: 0 0.6 > Collector: 7.98 2.2 > > !! > > > > T5 is correct according to the diagram on page 55; leads 1 and 3 come > from the top of the core and leads 2 and 4 come from the bottom, and I > think that being so, the green winding cannot be reversed. > > _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com