Don, > You are correct for HF band usage - that operation should > remain 'as is'.
No, it should be an option on the HF bands as well. I enjoyed having it available on HF with the FT-2000 and strongly believe others would use it once they became familiar with its advantages. 73, ... Joe, W4TV > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Don Wilhelm > Sent: Friday, May 02, 2008 11:18 AM > To: hank k8dd > Cc: elecraft@mailman.qth.net > Subject: Re: [Elecraft] K3 - Linking the VFOs for CW - SSB switching > > > Hank, > > You are correct for HF band usage - that operation should > remain 'as is'. > I believe the original request came from a VHF/UHF/microwave type > person where the type of operation that is often used is to > switch to CW > when the SSB signal gets weak. As a result, such a function (if > implemented) should be active only when the transverter bands > are selected. > > There is also a VHF desire that the CW signal will be heard when the > receiving end is listening in SSB mode - so the CW vs. CW-reverse > selection becomes important and the CW frequency offset desired is > different than that normally used on HF. > > 73, > Don W3FPR > > hank k8dd wrote: > > I don't know about "Auto CW or SSB" > > I can hear the CW pileup now ...... some guy hits his foot > switch as > > he leans over to grab the spilled beverage and says "oh darn" or > > something like that, and the rest of the world knows he has > (a) a K3 > > and (b) spilled his beer. > > > > > _______________________________________________ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com