Would it still work for you if you used your paddle directly into the K3
paddle input and pc into the key input, then the programs would still key
directly? I'm wondering if you would want to change the PTT, lead-in and
tail features on the fly, ie could these all be programmed in config?
David
G3UNA
----- Original Message -----
From: "ni0c" <[EMAIL PROTECTED]>
To: <elecraft@mailman.qth.net>
Sent: Friday, September 05, 2008 6:30 PM
Subject: [Elecraft] K3 Keying
David, G3UNA, wrote:
"I would be interested to know why folks use external keyers in preference
to
the internal keyer."
I use the microHam CW keyer with my K2 and K3
for a couple of reasons. The two logging programs
that I use (DXBase 2007, and N1MM) work nicely
with the K1EL WinKey chip in the microHam.
The WinKey is very versatile, allowing one to key
the rigs from the computer keyboard, paddles, an
external numeric keypad, or icons provided by the
logging program. It also provides a programmable
PTT signal with lead-in and tail delays for keying
an amplifier.
73,
Chuck Guenther NI0C
K2/10 s/n 5853 K3 s/n 1061
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com