Thanks Lyle! For me that is great news!
I have another question on the KDVR3. If I am using PTT rather than VOX
can I play a DVR message by tapping for example M1. Let me explain
more. A long term problem with VHF contesting and using DVR on two
meters and above is hot switching the amplifier T/R relay at high power,
ie 8877 on two meters. By and large people use PTT and even then in
some cases a sequencer to be sure the amplifier T/R relay has to be
closed or at least gets a head start at two meters and up. If you use
DVR on VOX you soon burn up an amplifier T/R relay at Two meters and up
unless it is an expensive vaccum T/R and I have seen them go!
With the KDVR3 I am wondering when using the K3 with a XVERTER if one
can key it and the amplifier it is driving with PTT and then play the
KDVR3 message tapping the M1, etc. key.
I am assuming if the VOX is not on the KDVR3 will not key up the radio
if you accidently hit M1, etc. However I am wondering since in USB or
LSB you can send CW even though the radio has the VOX turned off. Put
another way you can not transmit with the mic until you engage PTT but
if you hit the key it still works jsut like VOX. Maybe there is a
setting where that can be defeated but if so I have missed it?
Ed W0SD
Lyle Johnson wrote:
Another reason for this request is if I understand what I read that
doing over the air recording would erase an existing message if the
buffer is full.
The 90-second record-off-the-air DVR loop buffer, and the eight DVR Tx
message memory buffers, are completely separate. You can't erase a Tx
Buffer message with an Rx recording, and vice versa.
At least, not with the current firmware :-)
73,
Lyle KK7P
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.176 / Virus Database: 270.9.16/1843 - Release Date: 12/11/2008 8:36 AM
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
