Is there somewhere where I might find a more exhaustive step by step
discussion of seting up sound levels on the pc while connected to the K3. I
may be a little dense and have not felt entirely comfortable with what I
have read in the manual. Maybe this discussion might include config menu
items and what the different settings would do to effect the way the K3
behaves with different modes?

A good example of this is the idea of setting the number of bars for pc
output, correct? Would this be done for actual rf output or would this be
done via setting tx to test?

thank you,

Rob KE7VHF

Robert Hall
www.RobertHall.com


On Wed, Jan 28, 2009 at 8:20 PM, Don Wilhelm <w3...@embarqmail.com> wrote:

> Ron,
>
> I would suggest that you reduce the soundcard output level and increase
> the K3 line in setting for smoother control of the audio level.  I run
> my K3 line in at 12 to 13 and adjust the soundcard level to achieve the
> proper number of ALC bars (4) - my soundcard controls are at the
> mid-point when it is adjusted correctly.
> I am using an internal SoundBlaster Live 24 soundcard. Your results may
> depend on your particular soundcard as well as the K3 settings.
>
> 73,
> Don W3FPR
>
> Ron W3ZV wrote:
> > Setting up my K3 for PSK31. Using PC with on board sound. (Intel
> > Integrated Audio). Stereo cable from K3 to sound card.  I am looking to
> > adjust  ALC for 4 bars using the line in adjustment. I find that a level
> > change of one unit on K3 (i.e. 5 to 6) changes ALC from zero bars
> > showing to 5 bars showing. Adjusting sound card levels move the onset
> > point but doesn't change the behavior. Am I missing something or do I
> > have something wrong with my setup?
> >
> > Ron W3ZV
> >
> >
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft@mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft    

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply via email to