My setup is as follows: Main: 13k, 6k, 2.7k, 500Hz Sub: 13k, 2.7k, 500Hz
I also have the wide-receive module installed on the sub. This way the sub receiver will have broad coverage while the main is strictly relegated to the amateur bands. It works quite well as the 13k filter in the sub does double duty for FM and AM receive. 73 de James K2QI -----Original Message----- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Brett Howard Sent: Thursday, July 09, 2009 1:31 AM To: elecraft@mailman.qth.net Subject: [Elecraft] K3 Filter Question Ok so I'm curious if I'll be able to do what I'd like. I'd like to setup my K3 for maximum flexibility. At the moment I have these filters. 2.8Khz 1.8Khz 1Khz 250Hz These 4 filters are duplicated in the lower 4 slots of both receivers. I'd like to have the ability to do AM and FM both TX and RX in this radio. Can I add the AM filter and KBPF into the main RX and then put the FM filter into the KRX3? I'm hoping that I can then use the MainRX for broad frequency coverage and AM broadcast receive. Then if I ever want to do FM work I simply have to use the sub receiver to do so. Will TX through the FM filter work with it in the sub RX... To the best of my knowledge it appears that I can set the rig up in this fashion but that doesn't always mean it will work how I expect it to. Am I all wet here? Thanks ~Brett ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
