Jeff,

The MFJ will work just fine.  I use a similar one from Drake which is air 
cooled for 100 watts.  You should not put in a KW into the dummy load...but the 
MFJ would work OK.  MFJ-260C.  At 100 watts out...you can use it for 1.5 
minutes.  Or 25 watts continuous.  This should work fine for what you need.

Lee - K0WA


 Ham Radio Operators:  Kansas QSO Party is August 28-29, 2010.  See 
www.ksqsoparty.org for details

In our day and age it seems that Common Sense is in short supply.  If you don't 
have any Common Sense - get some Common Sense and use it.  If you can't find 
any Common Sense, ask for help from somebody who has some Common Sense.  Is 
Common Sense divine?

Common Sense is the image of the Creator expressing revealed truth in my mind. 
-  J. Wolf






________________________________
From: "Jeff Hall, W6EZY" <w6...@arrl.net>
To: elecraft@mailman.qth.net
Sent: Tue, February 23, 2010 12:13:39 PM
Subject: [Elecraft] Need to select a dummy load for K3 TX 
calibration...(advice?)

Hello all,

I need help picking out a proper dummy load to use for calibrating my new
K3.  HRO is just up the road and they carry some of the less expensive MFJ
dummy loads -- would these be sufficient? Not looking to spend a lot of
money, but don't want to buy junk either.  What factors should I consider?
I'm assuming oil-cooled dummy loads are more robust, while air-cooled loads
are more compact, but you have to be more careful when operating or they can
burn up more easily.  The K3 manual says this is just a 5W test and I need a
load with low VSWR from 160 to 6.  What is considered "low" SWR? Anything
under 1:5?

If I can get by with the MFJ-260 for just $40, that sounds reasonable to me.

73 de Jeff, W6EZY
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to