> Every operator cranked the K3 output to max (110W output) could not > get them to leave it at 100. But there were no problems observed. > Every op had to fiddle with all the buttons....that's to be expected. > Hey, we're hams.
Probably not too SSB-neighborly that way. Not sure if this is already implemented, but I could almost see a need for maximum PWR and Tx compression settings, controlled only through the K3 utility software where those parameters could be set to some temporary maximum value -- say 100W for stand-alone K3s and ...~35W for use with amps on contest weekends where the K3 may be shared among several button-happy operators. Locking down those parameters and making them only adjustable through utility software might be enough keep guest ops from experimenting with controls that can do the most harm on the bands. Paul, W9AC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html