Hello, I've followed the instructions for installing these drivers and even believe it was working at one point. I've been playing around with things and can't remember what did and did not work. I can see the drivers loaded when inserting the device, but tvtime and mplayer don't work and I'm a bit confused about what I might have missed. I apologize if I should have put this on the wiki instead of via email. Any help appreciated. I'm attaching everything I believe is requested. I thought this was all working and yet I see a complaint about something missing in he logs.
Also, I have no need in the DVB modules at this time... Can they be causing problems and if so, how do I stop them from loading? At the moment, I'm just trying to stream my satellite receiver's output on US NTSC broadcast channel 60. Thanks so much for any help, Craig $ cat /proc/version Linux version 2.6.20-16-server ([EMAIL PROTECTED]) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Fri Aug 31 01:01:45 UTC 2007 $ gcc -v Using built-in specs. Target: i486-linux-gnu Configured with: ../src/configure -v --enable-languages=c,c++,fortran,objc,obj-c++,treelang --prefix=/usr --enable-shared --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --program-suffix=-4.1 --enable-__cxa_atexit --enable-clocale=gnu --enable-libstdcxx-debug --enable-mpfr --enable-checking=release i486-linux-gnu Thread model: posix gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4) $ lsusb Bus 002 Device 009: ID 2304:0227 Pinnacle Systems, Inc. [hex] Bus 002 Device 006: ID 04b8:0821 Seiko Epson Corp. Bus 002 Device 005: ID 045e:006a Microsoft Corp. Bus 002 Device 004: ID 050d:0244 Belkin Components Bus 002 Device 001: ID 0000:0000 Bus 001 Device 002: ID 051d:0002 American Power Conversion Back-UPS Pro 500/1000/1500 Bus 001 Device 001: ID 0000:0000 /var/log/messages Sep 17 15:44:28 localhost kernel: [91829.500000] usb 2-8: new high speed USB device using ehci_hcd and address 8 Sep 17 15:44:29 localhost kernel: [91829.810000] usb 2-8: configuration #1 chosen from 1 choice Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx: device is attached to a USB 2.0 bus Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx: you're using the experimental/unstable tree from mcentral.de Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx: there's also a stable tree available but which is limited to Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx: linux <=2.6.19.2 Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx: it's fine to use this driver but keep in mind that it will move Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx: to http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon as it's Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx: proved to be stable Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx #0: Alternate settings: 8 Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx #0: Alternate setting 0, max size= 0 Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx #0: Alternate setting 1, max size= 0 Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx #0: Alternate setting 2, max size= 1448 Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx #0: Alternate setting 3, max size= 2048 Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx #0: Alternate setting 4, max size= 2304 Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx #0: Alternate setting 5, max size= 2580 Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx #0: Alternate setting 6, max size= 2892 Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx #0: Alternate setting 7, max size= 3072 Sep 17 15:44:29 localhost kernel: [91830.620000] input: em2880/em2870 remote control as /class/input/input9 Sep 17 15:44:29 localhost kernel: [91830.620000] em28xx-input.c: remote control handler attached Sep 17 15:44:29 localhost kernel: [91830.700000] attach_inform: eeprom detected. Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 27 02 d0 12 5c 03 8e 16 a4 1c Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 00 00 Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b 1c 00 00 Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00 Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 69 00 Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00 Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 16 03 Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 38 00 30 00 30 00 Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 37 00 30 00 35 00 30 00 Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom b0: 31 00 39 00 35 00 36 00 36 00 36 00 36 00 00 00 Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Sep 17 15:44:30 localhost kernel: [91831.030000] EEPROM ID= 0x9567eb1a Sep 17 15:44:30 localhost kernel: [91831.030000] Vendor/Product ID= 2304:0227 Sep 17 15:44:30 localhost kernel: [91831.030000] AC97 audio (5 sample rates) Sep 17 15:44:30 localhost kernel: [91831.030000] 500mA max power Sep 17 15:44:30 localhost kernel: [91831.030000] Table at 0x27, strings=0x168e, 0x1ca4, 0x246a Sep 17 15:44:30 localhost kernel: [91831.150000] tuner 2-0061: chip found @ 0xc2 (em28xx #0) Sep 17 15:44:30 localhost kernel: [91831.150000] attach inform (default): detected I2C address c2 Sep 17 15:44:30 localhost kernel: [91831.150000] /home/setera/src/v4l-dvb-experimental/v4l/tuner-core.c: setting tuner callback Sep 17 15:44:30 localhost kernel: [91831.150000] tuner 0x61: Configuration acknowledged Sep 17 15:44:30 localhost kernel: [91831.150000] /home/setera/src/v4l-dvb-experimental/v4l/tuner-core.c: setting tuner callback Sep 17 15:44:30 localhost kernel: [91831.150000] /home/setera/src/v4l-dvb-experimental/v4l/xc3028-tuner.c: attach request! Sep 17 15:44:30 localhost kernel: [91831.150000] /home/setera/src/v4l-dvb-experimental/v4l/tuner-core.c: xc3028 tuner successfully loaded Sep 17 15:44:30 localhost kernel: [91831.440000] attach_inform: tvp5150 detected. Sep 17 15:44:31 localhost kernel: [91831.900000] em28xx #0: reading i2c device failed (error=-110) Sep 17 15:44:31 localhost kernel: [91831.900000] tvp5150 2-005c: *** unknown tvp5150 chip detected. Sep 17 15:44:31 localhost kernel: [91831.900000] tvp5150 2-005c: *** Rom ver is 4.234 Sep 17 15:44:34 localhost kernel: [91835.540000] Loading base firmware: xc3028_init0.i2c.fw Sep 17 15:44:54 localhost kernel: [91854.990000] Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw Sep 17 15:44:54 localhost kernel: [91855.550000] xc3028-tuner.c: firmware 2.7 Sep 17 15:44:54 localhost kernel: [91855.550000] ANALOG TV REQUEST Sep 17 15:44:55 localhost kernel: [91855.930000] em28xx #0: V4L2 device registered as /dev/video0 Sep 17 15:44:55 localhost kernel: [91855.930000] em28xx-audio.c: probing for em28x1 non standard usbaudio Sep 17 15:44:55 localhost kernel: [91855.930000] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger Sep 17 15:44:55 localhost kernel: [91855.930000] em2880-dvb.c: DVB Init Sep 17 15:44:55 localhost kernel: [91855.930000] Loading base firmware: xc3028_8MHz_init0.i2c.fw Sep 17 15:45:15 localhost kernel: [91875.850000] Loading default dtv settings: xc3028_DTV8_2633.i2c.fw Sep 17 15:45:15 localhost kernel: [91876.400000] xc3028-tuner.c: firmware 2.7 Sep 17 15:45:15 localhost kernel: [91876.400000] Sending extra call for Digital TV! Sep 17 15:45:15 localhost kernel: [91876.570000] /home/setera/src/v4l-dvb-experimental/v4l/xc3028-tuner.c: attach request! Sep 17 15:45:15 localhost kernel: [91876.570000] DVB: registering new adapter (em2880 DVB-T) Sep 17 15:45:15 localhost kernel: [91876.570000] DVB: registering frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)... Sep 17 15:45:15 localhost kernel: [91876.570000] em28xx #0: Found Pinnacle PCTV HD Pro Sep 17 15:46:00 localhost kernel: [91921.380000] em28xx-video.c: Switching device from DVB-T to analogue mode Sep 17 15:46:00 localhost kernel: [91921.380000] Loading base firmware: xc3028_init0.i2c.fw Sep 17 15:46:07 localhost kernel: [91927.890000] FIXME:em28xx_i2c_send_bytes(c2): write failed: Sep 17 15:46:07 localhost kernel: [91927.890000] =============================== Sep 17 15:46:07 localhost kernel: [91927.890000] 04 0d e0 00 Sep 17 15:46:07 localhost kernel: [91927.890000] ================================ Sep 17 15:46:21 localhost kernel: [91941.820000] Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw Sep 17 15:46:21 localhost kernel: [91942.450000] xc3028-tuner.c: firmware 2.7 Sep 17 15:46:22 localhost kernel: [91943.160000] em28xx #0: reading i2c device failed (error=-110) Sep 17 15:46:22 localhost kernel: [91943.160000] tvp5150 2-005c: *** unknown tvp5150 chip detected. Sep 17 15:46:22 localhost kernel: [91943.160000] tvp5150 2-005c: *** Rom ver is 4.234 Sep 17 15:46:25 localhost kernel: [91946.660000] ANALOG TV REQUEST Sep 17 15:46:26 localhost kernel: [91947.230000] ANALOG TV REQUEST Sep 17 15:46:26 localhost kernel: [91947.230000] xc3028_tuner_set_params, Loading specific configuration for requested mode xc3028_MN_NTSCPAL_A2.i2c.fw Running tvtime 1.0.2. Reading configuration from /etc/tvtime/tvtime.xml Reading configuration from /home/setera/.tvtime/tvtime.xml videoinput: Can't get tuner info: Input/output error videoinput: Can't set tuner audio mode: Input/output error Your capture card driver: em28xx [Pinnacle PCTV HD Pro/2-8/1] does not support studio-quality colour images required by tvtime. This is a hardware limitation of some cards including many low-quality webcams. Please select a different video device to use with the command line option --device. Message from the card was: Input/output error Thank you for using tvtime. MPlayer 2:1.0~rc1-0ubuntu9.1 (C) 2000-2006 MPlayer Team CPU: AMD Athlon(tm) 64 Processor 3000+ (Family: 15, Model: 47, Stepping: 2) CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1 Compiled with runtime CPU detection. Can't open joystick device /dev/input/js0: No such file or directory Can't init input joystick mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing tv://. TV file format detected. Selected driver: v4l2 name: Video 4 Linux 2 input author: Martin Olschewski <[EMAIL PROTECTED]> comment: first try, more to come ;-) Selected device: Pinnacle PCTV HD Pro Tuner cap: Tuner rxs: Capabilites: video capture tuner audio read/write streaming supported norms: inputs:v4l2: ioctl get input failed: Input/output error Current input: 0 Current format: YUYV v4l2: ioctl get format failed: Input/output error _______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
