Markus, I have the v4 firmware downloaded/installed. Since this is NTSC, I'm assuming that is correct? What else might I be doing wrong? In the kernel messages, I see the following things that seem questionable:
Sep 17 15:44:31 localhost kernel: [91831.900000] em28xx #0: reading i2c device failed (error=-110) Sep 17 15:44:31 localhost kernel: [91831.900000] tvp5150 2-005c: *** unknown tvp5150 chip detected. Sep 17 15:44:31 localhost kernel: [91831.900000] tvp5150 2-005c: *** Rom ver is 4.234 Sep 17 15:46:00 localhost kernel: [91921.380000] Loading base firmware: xc3028_init0.i2c.fw Sep 17 15:46:07 localhost kernel: [91927.890000] FIXME:em28xx_i2c_send_bytes(c2): write failed: Sep 17 15:46:07 localhost kernel: [91927.890000] =============================== Sep 17 15:46:07 localhost kernel: [91927.890000] 04 0d e0 00 Sep 17 15:46:07 localhost kernel: [91927.890000] ================================ I'm also seeing it try to load the PAL firmware, which seems a bit odd, but since I don't have a program driving the "correct" standard this might be nothing to worry about. Sep 17 15:46:21 localhost kernel: [91941.820000] Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw Sep 17 15:46:21 localhost kernel: [91942.450000] xc3028-tuner.c: firmware 2.7 Thanks for your help, Craig Markus Rechberger wrote: > Did you use the correct firmware? > there's no 330e chip. > Your device is based on following chips: em2882, lgdt3303, tvp5150 and xc3028 > > Markus > _______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
