Hi there, Excuse my ignorance, but I have had the same issue. When I bought this hardware, I did not realize that the 330e model was not yet supported on linux. I tried to used the analog part of the card, but had no success. Finally, I decided just to wait for dvb-t support to be available. This is a good time to join my voice to the chorus, though. I think analog tv is supposed to work right now. I cannot be sure, though.
Any idea when support for dvb on 330e will be available? Thanks so much, -- Remi 2007/9/18, Craig Setera <[EMAIL PROTECTED]>: > Hello, > > I've followed the instructions for installing these drivers and even > believe it was working at one point. I've been playing around with > things and can't remember what did and did not work. I can see the > drivers loaded when inserting the device, but tvtime and mplayer don't > work and I'm a bit confused about what I might have missed. I apologize > if I should have put this on the wiki instead of via email. Any help > appreciated. I'm attaching everything I believe is requested. I > thought this was all working and yet I see a complaint about something > missing in he logs. > > Also, I have no need in the DVB modules at this time... Can they be > causing problems and if so, how do I stop them from loading? At the > moment, I'm just trying to stream my satellite receiver's output on US > NTSC broadcast channel 60. > > Thanks so much for any help, > Craig > > $ cat /proc/version > Linux version 2.6.20-16-server ([EMAIL PROTECTED]) (gcc version 4.1.2 > (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Fri Aug 31 01:01:45 UTC 2007 > > $ gcc -v > Using built-in specs. > Target: i486-linux-gnu > Configured with: ../src/configure -v > --enable-languages=c,c++,fortran,objc,obj-c++,treelang --prefix=/usr > --enable-shared --with-system-zlib --libexecdir=/usr/lib > --without-included-gettext --enable-threads=posix --enable-nls > --program-suffix=-4.1 --enable-__cxa_atexit --enable-clocale=gnu > --enable-libstdcxx-debug --enable-mpfr --enable-checking=release > i486-linux-gnu > Thread model: posix > gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4) > > $ lsusb > Bus 002 Device 009: ID 2304:0227 Pinnacle Systems, Inc. [hex] > Bus 002 Device 006: ID 04b8:0821 Seiko Epson Corp. > Bus 002 Device 005: ID 045e:006a Microsoft Corp. > Bus 002 Device 004: ID 050d:0244 Belkin Components > Bus 002 Device 001: ID 0000:0000 > Bus 001 Device 002: ID 051d:0002 American Power Conversion Back-UPS Pro > 500/1000/1500 > Bus 001 Device 001: ID 0000:0000 > > /var/log/messages > Sep 17 15:44:28 localhost kernel: [91829.500000] usb 2-8: new high speed > USB device using ehci_hcd and address 8 > Sep 17 15:44:29 localhost kernel: [91829.810000] usb 2-8: configuration > #1 chosen from 1 choice > Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx: device is > attached to a USB 2.0 bus > Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx: you're using > the experimental/unstable tree from mcentral.de > Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx: there's also a > stable tree available but which is limited to > Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx: linux <=2.6.19.2 > Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx: it's fine to > use this driver but keep in mind that it will move > Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx: to > http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon as it's > Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx: proved to be > stable > Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx #0: Alternate > settings: 8 > Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx #0: Alternate > setting 0, max size= 0 > Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx #0: Alternate > setting 1, max size= 0 > Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx #0: Alternate > setting 2, max size= 1448 > Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx #0: Alternate > setting 3, max size= 2048 > Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx #0: Alternate > setting 4, max size= 2304 > Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx #0: Alternate > setting 5, max size= 2580 > Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx #0: Alternate > setting 6, max size= 2892 > Sep 17 15:44:29 localhost kernel: [91829.820000] em28xx #0: Alternate > setting 7, max size= 3072 > Sep 17 15:44:29 localhost kernel: [91830.620000] input: em2880/em2870 > remote control as /class/input/input9 > Sep 17 15:44:29 localhost kernel: [91830.620000] em28xx-input.c: remote > control handler attached > Sep 17 15:44:29 localhost kernel: [91830.700000] attach_inform: eeprom > detected. > Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom > 00: 1a eb 67 95 04 23 27 02 d0 12 5c 03 8e 16 a4 1c > Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom > 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 00 00 > Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom > 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b 1c 00 00 > Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom > 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00 > Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom > 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 69 00 > Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom > 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00 > Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom > 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 16 03 > Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom > 90: 50 00 43 00 54 00 56 00 20 00 38 00 30 00 30 00 > Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom > a0: 65 00 00 00 1c 03 30 00 37 00 30 00 35 00 30 00 > Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom > b0: 31 00 39 00 35 00 36 00 36 00 36 00 36 00 00 00 > Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > Sep 17 15:44:30 localhost kernel: [91831.030000] em28xx #0: i2c eeprom > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > Sep 17 15:44:30 localhost kernel: [91831.030000] EEPROM ID= 0x9567eb1a > Sep 17 15:44:30 localhost kernel: [91831.030000] Vendor/Product ID= > 2304:0227 > Sep 17 15:44:30 localhost kernel: [91831.030000] AC97 audio (5 sample > rates) > Sep 17 15:44:30 localhost kernel: [91831.030000] 500mA max power > Sep 17 15:44:30 localhost kernel: [91831.030000] Table at 0x27, > strings=0x168e, 0x1ca4, 0x246a > Sep 17 15:44:30 localhost kernel: [91831.150000] tuner 2-0061: chip > found @ 0xc2 (em28xx #0) > Sep 17 15:44:30 localhost kernel: [91831.150000] attach inform > (default): detected I2C address c2 > Sep 17 15:44:30 localhost kernel: [91831.150000] > /home/setera/src/v4l-dvb-experimental/v4l/tuner-core.c: setting tuner > callback > Sep 17 15:44:30 localhost kernel: [91831.150000] tuner 0x61: > Configuration acknowledged > Sep 17 15:44:30 localhost kernel: [91831.150000] > /home/setera/src/v4l-dvb-experimental/v4l/tuner-core.c: setting tuner > callback > Sep 17 15:44:30 localhost kernel: [91831.150000] > /home/setera/src/v4l-dvb-experimental/v4l/xc3028-tuner.c: attach request! > Sep 17 15:44:30 localhost kernel: [91831.150000] > /home/setera/src/v4l-dvb-experimental/v4l/tuner-core.c: xc3028 tuner > successfully loaded > Sep 17 15:44:30 localhost kernel: [91831.440000] attach_inform: tvp5150 > detected. > Sep 17 15:44:31 localhost kernel: [91831.900000] em28xx #0: reading i2c > device failed (error=-110) > Sep 17 15:44:31 localhost kernel: [91831.900000] tvp5150 2-005c: *** > unknown tvp5150 chip detected. > Sep 17 15:44:31 localhost kernel: [91831.900000] tvp5150 2-005c: *** Rom > ver is 4.234 > Sep 17 15:44:34 localhost kernel: [91835.540000] Loading base firmware: > xc3028_init0.i2c.fw > Sep 17 15:44:54 localhost kernel: [91854.990000] Loading default > analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw > Sep 17 15:44:54 localhost kernel: [91855.550000] xc3028-tuner.c: > firmware 2.7 > Sep 17 15:44:54 localhost kernel: [91855.550000] ANALOG TV REQUEST > Sep 17 15:44:55 localhost kernel: [91855.930000] em28xx #0: V4L2 device > registered as /dev/video0 > Sep 17 15:44:55 localhost kernel: [91855.930000] em28xx-audio.c: probing > for em28x1 non standard usbaudio > Sep 17 15:44:55 localhost kernel: [91855.930000] em28xx-audio.c: > Copyright (C) 2006 Markus Rechberger > Sep 17 15:44:55 localhost kernel: [91855.930000] em2880-dvb.c: DVB Init > Sep 17 15:44:55 localhost kernel: [91855.930000] Loading base firmware: > xc3028_8MHz_init0.i2c.fw > Sep 17 15:45:15 localhost kernel: [91875.850000] Loading default dtv > settings: xc3028_DTV8_2633.i2c.fw > Sep 17 15:45:15 localhost kernel: [91876.400000] xc3028-tuner.c: > firmware 2.7 > Sep 17 15:45:15 localhost kernel: [91876.400000] Sending extra call for > Digital TV! > Sep 17 15:45:15 localhost kernel: [91876.570000] > /home/setera/src/v4l-dvb-experimental/v4l/xc3028-tuner.c: attach request! > Sep 17 15:45:15 localhost kernel: [91876.570000] DVB: registering new > adapter (em2880 DVB-T) > Sep 17 15:45:15 localhost kernel: [91876.570000] DVB: registering > frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)... > Sep 17 15:45:15 localhost kernel: [91876.570000] em28xx #0: Found > Pinnacle PCTV HD Pro > Sep 17 15:46:00 localhost kernel: [91921.380000] em28xx-video.c: > Switching device from DVB-T to analogue mode > Sep 17 15:46:00 localhost kernel: [91921.380000] Loading base firmware: > xc3028_init0.i2c.fw > Sep 17 15:46:07 localhost kernel: [91927.890000] > FIXME:em28xx_i2c_send_bytes(c2): write failed: > Sep 17 15:46:07 localhost kernel: [91927.890000] > =============================== > Sep 17 15:46:07 localhost kernel: [91927.890000] 04 0d e0 00 > Sep 17 15:46:07 localhost kernel: [91927.890000] > ================================ > Sep 17 15:46:21 localhost kernel: [91941.820000] Loading default > analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw > Sep 17 15:46:21 localhost kernel: [91942.450000] xc3028-tuner.c: > firmware 2.7 > Sep 17 15:46:22 localhost kernel: [91943.160000] em28xx #0: reading i2c > device failed (error=-110) > Sep 17 15:46:22 localhost kernel: [91943.160000] tvp5150 2-005c: *** > unknown tvp5150 chip detected. > Sep 17 15:46:22 localhost kernel: [91943.160000] tvp5150 2-005c: *** Rom > ver is 4.234 > Sep 17 15:46:25 localhost kernel: [91946.660000] ANALOG TV REQUEST > Sep 17 15:46:26 localhost kernel: [91947.230000] ANALOG TV REQUEST > Sep 17 15:46:26 localhost kernel: [91947.230000] > xc3028_tuner_set_params, Loading specific configuration for requested > mode xc3028_MN_NTSCPAL_A2.i2c.fw > > Running tvtime 1.0.2. > Reading configuration from /etc/tvtime/tvtime.xml > Reading configuration from /home/setera/.tvtime/tvtime.xml > videoinput: Can't get tuner info: Input/output error > videoinput: Can't set tuner audio mode: Input/output error > > Your capture card driver: em28xx [Pinnacle PCTV HD Pro/2-8/1] > does not support studio-quality colour images required by tvtime. > This is a hardware limitation of some cards including many > low-quality webcams. Please select a different video device to use > with the command line option --device. > > Message from the card was: Input/output error > > Thank you for using tvtime. > > MPlayer 2:1.0~rc1-0ubuntu9.1 (C) 2000-2006 MPlayer Team > CPU: AMD Athlon(tm) 64 Processor 3000+ (Family: 15, Model: 47, Stepping: 2) > CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1 > Compiled with runtime CPU detection. > Can't open joystick device /dev/input/js0: No such file or directory > Can't init input joystick > mplayer: could not connect to socket > mplayer: No such file or directory > Failed to open LIRC support. You will not be able to use your remote > control. > > Playing tv://. > TV file format detected. > Selected driver: v4l2 > name: Video 4 Linux 2 input > author: Martin Olschewski <[EMAIL PROTECTED]> > comment: first try, more to come ;-) > Selected device: Pinnacle PCTV HD Pro > Tuner cap: > Tuner rxs: > Capabilites: video capture tuner audio read/write streaming > supported norms: > inputs:v4l2: ioctl get input failed: Input/output error > > Current input: 0 > Current format: YUYV > v4l2: ioctl get format failed: Input/output error > > > > _______________________________________________ > Em28xx mailing list > [email protected] > http://mcentral.de/mailman/listinfo/em28xx > _______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
